X hits on this document

PDF document

FAA-STC/PMA Approved - page 23 / 27

92 views

0 shares

0 downloads

0 comments

23 / 27

PXE7300 Installation and Operator’s Manual

PXE7300 Connector

21

22 1 A

14- 28 VDC Aircraft Power (2 A Breaker) Aircraft Ground

14 V Dimmer 28 V Dimmer

2 B

Antenna Input Antenna Ground

20

AUX Enable

C 3 6

IFE Audio Out (L)

IFE Audio Out (R) Audio Lo

Entertainment Output connected to audio panel or intercom

Z

16 17 K

15 S

14 R

13 P

Shield Ground Notes: 1. All audio wiring must be MIL 22750 or 27500 24 AWG minumum.. 2. Power and Ground #18AWG Mil-Spec Tefzel minimum. Lighting #22 AWG minimum. 3. Circuit breaker must be PULL TYPE 4. Unswitched audio presented to inputs 1 thru 4 is summed and provided at output pin 18 WRT V. Hi 5. Applying a ground to Pin 20 will activate the AUX mode. AUX Entertainment Input (R) AUX Entertainment Input (L) AUX Entertainment Lo Unswitched Audio Input 1 Unswitched Audio Input 1 allowing audio appearing on pins 16 and 17 to pass to the output when the MODE is set for AUX. Lo Unswitched Audio Input 2 Unswitched Audio Input 2 Hi 6. (OPTION 1 UNITS ONLY) Applying a low (ground) Lo or positive (> 5VDC if configured) to these pins will activate a specific track on discs which have been preprogrammed by the user. Unswitched Audio Input 3 Unswitched Audio Input 3 Hi Lo

12 N

Unswitched Audio Input 4 Unswitched Audio Input 4

Hi Lo

Add Opt 1

01/06/03

Corrected

11/20/02

18 V

Summed Audio Output Hi Summed Audio Output Lo

REV

DWN DATE

Added MSG

10/16/02

Change

DATE

By

APR

5 9 7 10 8

Message 1 Message 2 Message 3 Message 4 Message 5

CKD DATE

TITLE:

APR DATE

A DATE:

SHEET

REV

OF

200-973-0002

Appendix C

April 2006

Document info
Document views92
Page views92
Page last viewedWed Dec 07 08:34:24 UTC 2016
Pages27
Paragraphs913
Words6927

Comments