X hits on this document

675 views

0 shares

0 downloads

0 comments

151 / 174

Microsoft Windows Logo Program System and Device Requirements  —  151

B10.4.3.1 Pass WHQL tests - See B1.3, B10.1.4.7.

See “Hard Disk Drive” in the HCT documentation.

B10.4.3.2, B10.4.3.3, B10.4.3.5 - See B10.4.3.1
B10.4.3.4 - See B10.1.4.7
B10.4.3.6 - See B10.4.4.5

B10.4.4 Hard Disk Drives - Windows Experience

B10.4.4.1 ATA hard disk supports bus mastering and UDMA/DMA

See B10.1.4.6

B10.4.4.2 DELETED
B10.4.4.3 DELETED  
B10.4.4.4 DELETED
B10.4.4.5 Windows Server 2003, Standard Edition: SCSI and Fibre Channel devices implement complete device identification data

Device identification data is defined in SCSI Primary Commands-2 (SCSI-3 SPC-2 or later), Section 8.4, Vital Product Data Parameters.

This support is used for unique ID of devices with host connection, in multipath, failover, and LUN ID. In particular, unique serial numbers and type 2 or type 3 device IDs are recommended.

B10.4.5 Hard Disk Drives - FAQs

See B10.1.5.

B10.4.R Hard Disk Drives - Future Requirements

See B10.1.R.

B10.5 CD/DVD Drives

All general requirements in B1.0 are included by reference. All bus-specific requirements in B2.0 are included by reference. All general storage requirements in B10.1 are included by reference. All ATA/ATAPI device-specific requirements in B10.2 are included by reference. All SCSI device-specific requirements in B10.3 are included by reference.

B10.5.1 CD/DVD Drives - Windows Compatibility

B10.5.1.1 DVD Multifunction Devices: Avoiding Multiple Logical Unit Devices

http://www.microsoft.com/hwdev/tech/stream/DVD/multiLUN.asp

B10.5.2 CD/DVD Drives - Industry Standards

© 1999-2002 Microsoft Corporation. All rights reserved.

Document info
Document views675
Page views675
Page last viewedMon Jan 23 05:23:37 UTC 2017
Pages174
Paragraphs4629
Words57695

Comments