X hits on this document





157 / 174

Microsoft Windows Logo Program System and Device Requirements  —  157

B10.6.R Removable Media Drives - Future Requirements

See B10.1.R.

B10.7 Tape Drives

All general requirements in B1.0 are included by reference. All bus-specific requirements in B2.0 are included by reference. All general storage requirements in B10.1 are included by reference. All ATA/ATAPI device-specific requirements in B10.2 are included by reference. All SCSI device-specific requirements in B10.3 are included by reference.

B10.7.1 Tape Drives - Windows Compatibility

See B10.1.1.

B10.7.2 Tape Drives - Industry Standards

B10.7.2.1 Tape-related standards
B10. Cartridge drives: QIC 157 Revision D, "Common SCSI/ATAPI Command Set For Streaming Tape"


B10. ATA tape drive complies with packet passing protocol in ATA/ATAPI-5 (or later).
B10. SCSI tape drive complies with SCSI tape command set SCSI-3 (or later) Stream Commands (SSC), INCITS.335:2000.
B10.7.2.2 - See B10.1.2

B10.7.3 Tape Drives - Quality

B10.7.3.1 - See B10.7.3.2
B10.7.3.2 Pass WHQL tests - See B1.3, B10.1.4.7.

See “Tape Drive” in the HCT documentation.

B10.7.4 Tape Drives - Windows Experience

B10.7.4.1 To tolerate Ultra DMA, ATAPI devices support the termination scheme defined in ATA/ATAPI-5 (or later)

See B10.2.4.4

B10.7.4.2 Windows Server 2003: Driver integrates with Removable Storage Manager

For a backup device designed for Windows Server 2003, the manufacturer must provide a Windows driver that integrates with Removable Storage Manager (RSM), formerly Windows NT Media Services. This ensures that applications which are RSM-aware (such as the native Windows backup and hierarchical storage management applications) will be properly able to utilize the backup device.

© 1999-2002 Microsoft Corporation. All rights reserved.

Document info
Document views351
Page views351
Page last viewedFri Oct 28 02:55:47 UTC 2016