Microsoft Windows Logo Program System and Device Requirements — 169
See “Streaming Media and Broadcast” in the HCT documentation.
B11.3.4 TV Tuner - Windows Experience
Design Guideline References: "TV and Broadcast Driver Architecture" web page at http://www.microsoft.com/hwdev/tech/stream/broadcast/
B18.104.22.168 VBI capture samples VBI data exactly 4.7 or 5 times
To ensure accurate data reception, data transmitted on all lines of the VBI must be oversampled exactly 4.7 or 5 times the North American Basic Teletext (NABTS) data bit rate (or locale-specific data bit rate). For example, if there are 288 bits of NABTS data on a scan line, approximately 1,354 one-byte samples, plus the necessary margin, must be captured per scan line if 4.7x oversampling is used. This represents the number required for timing tolerances in the NABTS specification and also for timing uncertainties within the capture hardware.
If the hardware cannot provide 4.7 or 5 times oversampled VBI data, the device-specific driver must compensate by resampling, so that 4.7 or 5 times oversampled data are presented to the operating system.
B22.214.171.124 through B126.96.36.199 DELETED
B188.8.131.52 - See B184.108.40.206.7
B11.3.5 TV Tuner - FAQs
B11.3.R TV Tuner - Future Requirements
Announcement of additional future requirements will be published at http://www.microsoft.com/winlogo/hardware/.
B11.4 Video Input/Capture
All general requirements in B1.0 are included by reference. All bus-specific requirements in B2.0 are included by reference. All general requirements in B11.1 are included by reference.
B11.4.1 Video Input/Capture - Windows Compatibility
B220.127.116.11 Windows compatibility and implementation notes—Video Capture
Note: This is a general reference, not a requirement.
© 1999-2002 Microsoft Corporation. All rights reserved.