Microsoft Windows Logo Program System and Device Requirements — 29
A1.3 General System - Quality
WHQL Test Specification References: Chapter 1: Introduction to HCT Test Specifications Chapter 3: ACPI Test Specification Chapter 22: Driver Quality Test Specification Plus technology-specific test specifications
A1.3.1 Product passes related Windows Logo Program testing
Product is submitted to the appropriate WHQL test program and passes all testing for the Windows Logo Program for hardware:
Windows XP/Windows Server 2003 family: Pass tests in HCT 11.0 (or later), as described in detail in the WHQL Test Specification and the Microsoft Windows Hardware Compatibility Test Kit documentation.
A1.3.2 – DELETED
A1.3.3 - See A1.4.12
A1.3.4 DELETED - See A5.4.4.
A1.4 General System - Windows Experience
Design Guideline References: OnNow and ACPI implementation notes - http://www.microsoft.com/hwdev/tech/onnow/
A1.4.2 See A1.1.4; WL-6 x86-based client: System and all components correctly implement power management
A126.96.36.199 Uniprocessor desktop system must support S1, S3, S4, S5.
A system preinstalled with Windows XP must enable S3 by default in the BIOS. System test submissions for Windows Me and that also support Windows 2000, Windows XP, or both must use the same BIOS for all submissions. In this case, S3 may be disabled in the BIOS for the Windows Me test passes but S3 must remain enabled in the BIOS for Windows XP/Windows 2000 test passes.
Desktop systems must support wake from all supported sleep states, except S4 and S5.
System power supply must provide standby power for system wake-up events.
Note: For multiprocessor desktop sleep states and wake requirements, see A1.1.5.
A188.8.131.52 Devices must correctly implement D3 state such that the operating system can correctly hibernate and resume from all sleep states supported on the system.
© 1999-2002 Microsoft Corporation. All rights reserved.