X hits on this document





40 / 174

Microsoft Windows Logo Program System and Device Requirements  —  40

Audio, including line-in, line-out, microphone, and headphone DVI Floppy drive IEEE 1394 PHY LAN MIDI port Modem Parallel or LPT port PS/2 port Serial port USB connector: pass-through connector is allowed to be low power Video Any bus used exclusively for manageability

Docking Station: For the purposes of the Windows Logo Program, a Docking Station connects to the mobile PC’s PCI bus and includes the functionality of a Port Replicator plus additional expansion in the form of Plug and Play-enumerable devices or slots. FAQ date: October 6, 2000

A3.R Mobile PC Client - Future Requirements

Announcement of additional future requirements will be published at http://www.microsoft.com/winlogo/hardware/

A4.0 Legacy-Free PC System Requirements

This section describes additional requirements or exceptions to the requirements defined earlier in Section A1.0.

A4.1 Legacy-Free PC System - Windows Compatibility

A4.1.1 ACPI legacy-free support is reported as described in "ACPI Changes for Legacy Free"

Any x86-based system designs that reduce the amount of legacy ISR support in conjunction with other legacy removal efforts (such as 8042 removal) must still provide the necessary ISRs required to boot systems using BIOS. The minimum requirements include support for ISR 8h, 13h, and 19h (all functions), and ISR 15h, function E820h.

To achieve this, Fixed ACPI Description Table (FADT) settings must be supported and correctly implemented, including support for reporting legacy-free and hard reset/boot capabilities, as described in the specification at http://www.microsoft.com/hwdev/tech/onnow/LF-ACPI.asp.

A4.1.1.1 LEGACY_DEVICES flag is set to 0 in the ACPI FADT as defined in ACPI section 5.2.1.

A4.1.1.2 ACPI reset mechanism as defined in ACPI section 4.7.5.

A4.1.1.3 8042 flag is set to 0 in systems that do not include an 8042 controller; value is set to 1 in a mobile or desktop system that includes an 8042 controller.

A4.1.1.4 Debug Port Table in the BIOS, as described in ACPI section 5.2.11.

A4.1.2 Plug and Play detection does not report the presence of Super I/O-dependent components

Based on addresses and exceptions listed in A4.1.3.

A4.1.3 No components claim to use the restricted port addresses

© 1999-2002 Microsoft Corporation. All rights reserved.

Document info
Document views538
Page views538
Page last viewedMon Jan 16 11:26:10 UTC 2017