X hits on this document

426 views

0 shares

0 downloads

0 comments

64 / 174

Microsoft Windows Logo Program System and Device Requirements  —  64

If wake-from-D3cold is implemented in a platform, the following are required:

Associated CardBus controller must support PME# assertion from D3cold.

Associated socket must supply sufficient Vaux power to support the card in its D3cold state.

This requirement must be independently met by each enabled D3cold-wake-capable CardBus socket in the system, as defined in the host system chapter of PC Card Standard, version 7.

B2.1.5 CardBus/PCMCIA Controllers and Devices - FAQs

B2.1.5.1 Current PC Card/CardBus FAQs

See http://www.microsoft.com/winlogo/hardware/

B2.1.5.2 Updated at B2.1.4.3
B2.1.5.3 Updated at  B2.1.4.6
B2.1.5.4 Updated at B2.1.4.2

B2.1.R CardBus/PCMCIA Controllers and Devices - Future Requirements

Announcement of additional future requirements will be published at http://www.microsoft.com/winlogo/hardware/

B2.2 IEEE 1394 Controllers and Devices

All general requirements in B1.0 are included by reference.

B2.2.1 1394 Controllers/Devices - Windows Compatibility

B2.2.1.1 WDM support for devices that use the IEEE 1394 bus

"IEEE 1394 Structures" in the Windows DDK.

Note: This is a general reference, not a requirement.

B2.2.1.2 Windows compatibility and implementation notes (general)

http://www.microsoft.com/hwdev/bus/1394/

Note: This is a general reference, not a requirement.

B2.2.1.3 Plug and Play Specification for IEEE 1394

http://www.microsoft.com/hwdev/resources/specs/1394PNP.asp

Note: This is a general reference, not a requirement.

B2.2.1.4 IEEE 1394 Support in Windows 

http://www.microsoft.com/hwdev/bus/1394/

Note: This is a general reference, not a requirement.

B2.2.2 1394 Controllers/Devices - Industry Standards

© 1999-2002 Microsoft Corporation. All rights reserved.

Document info
Document views426
Page views426
Page last viewedTue Dec 06 09:08:25 UTC 2016
Pages174
Paragraphs4629
Words57695

Comments