Microsoft Windows Logo Program System and Device Requirements — 68
B188.8.131.52 IrDA documents - Serial Infrared Physical Layer Specification; Control IR Specification
An IR device must be designed to comply with approved IrDA specifications. If the system is intended to run data transfer applications with other IrDA data devices, it must comply with the IrDA Serial Infrared Data Link Standard Specifications.
B184.108.40.206 IrDA Bridge Device Definition, 1.0
B220.127.116.11 Bluetooth Wireless Technology Specifications
Bluetooth H:1 Specification Bluetooth SDP Specification Bluetooth Specification 1.1
B18.104.22.168 IEEE 802.11 Specifications
B2.3.3 Infrared/Wireless - Quality
WHQL Test Specification References: Chapter 22: Driver Quality Test Specification Plus technology-specific test specifications
B22.214.171.124 Pass WHQL tests - See B1.3.
Windows XP: See “Bluetooth Controllers,” “Infrared (IrDA) Controllers,” and device-specific topics in the HCT documentation.
B2.3.4 Infrared/Wireless - Windows Experience
Design Guideline References: "Wireless Technologies" web page at http://www.microsoft.com/hwdev/tech/network/wireless/
B126.96.36.199 System supports standard input speeds of 4 Mb/s
Device support is required for FIR input speeds of 4 Mbps for all IrDA Data devices.
B188.8.131.52 System provides a separate, physically-isolated transceiver for each IR protocol supported
This requirement provides for correct implementation for a system that includes IR support for any combination of devices that use the IrDA Data protocol, the IrDA Control protocol, or the universal consumer–IR approach to legacy remote control, each of which use different device signals. The system must also expose each separate transceiver to the operating system.
If multiple IR protocols are supported, controllers must provide separate data connections into the PC using USB.
B184.108.40.206 Mobile PC IR devices, if implemented, support D0 and D3 states
© 1999-2002 Microsoft Corporation. All rights reserved.