X hits on this document

474 views

0 shares

0 downloads

0 comments

71 / 174

Microsoft Windows Logo Program System and Device Requirements  —  71

WHQL Test Specification References: Chapter 1: Introduction to HCT Test Specifications

B2.4.3.1 Pass WHQL tests - See B1.3

See the “Motherboard” topic in the HCT documentation.

B2.4.4 Parallel/Serial Devices - Windows Experience

Design Guideline References: Legacy Plug and Play Guidelines

B2.4.4.1 Plug and Play capabilities and operating system compatibility

Implemented as defined in Legacy Plug and Play Guidelines

Note: The following summarizes these legacy requirements, based on Legacy Plug and Play Guidelines:

B2.4.4.1.1 Serial port meets device class specifications for its bus.
B2.4.4.1.2 Legacy serial port is implemented as 16550A UART or equivalent and supports 115.2K baud.
B2.4.4.1.3 DELETED
B2.4.4.1.4 DELETED
B2.4.4.1.5 Parallel port meets device class specifications for its bus.
B2.4.4.1.6 DELETED
B2.4.4.1.7 DELETED
B2.4.4.1.8 DELETED
B2.4.4.1.9 DELETED
B2.4.4.1.10 IEEE 1284 peripherals have Plug and Play device IDs.
B2.4.4.1.11 DELETED
B2.4.4.1.12 DELETED

B2.4.5 Parallel/Serial Devices - FAQs

See http://www.microsoft.com/winlogo/hardware/

B2.4.R Parallel/Serial Devices - Future Requirements

Announcement of additional future requirements will be published at http://www.microsoft.com/winlogo/hardware/

B2.5 PCI Controllers and Devices

All general requirements in B1.0 are included by reference.

© 1999-2002 Microsoft Corporation. All rights reserved.

Document info
Document views474
Page views474
Page last viewedThu Dec 08 19:06:12 UTC 2016
Pages174
Paragraphs4629
Words57695

Comments