Microsoft Windows Logo Program System and Device Requirements — 96
B126.96.36.199 Graphics adapter driver properly supports D3 state
…such that Windows can hibernate and restore the system from any system-supported sleep state
The Display Device Class Power Management Reference Specification, Version 2.0, provides definitions of the OnNow device power states (D0–D3) for display and graphics devices. The specification also covers device functionality expected in each power state and the possible wakeup event definitions for the class, if any.
B188.8.131.52 – See A184.108.40.206
B220.127.116.11 – See A18.104.22.168
B22.214.171.124 Display Control Panel Extensions per DDK, with Advanced Properties tab
“Control Panel Requirements” Windows DDK
B4.1.5 Display Adapters/Chipsets - FAQs
B126.96.36.199 Current Display FAQs
B188.8.131.52 – Updated at B184.108.40.206.8
B220.127.116.11 See A18.104.22.168.5
B22.214.171.124 – DELETED
B126.96.36.199 – DELETED
B188.8.131.52 - Updated at B184.108.40.206
B220.127.116.11 – Updated at B18.104.22.168
B4.1.R Display Adapters/Chipsets - Future Requirements
Announcement of additional future requirements will be published at http://www.microsoft.com/winlogo/hardware/.
B4.1.R.1 TV output capability, if present, meets requirements
B4.1.4.R.1 Adapter supports underscan scaling.
If TV out is implemented, adapter supports overscan/underscan scaling. The television output adapter must be able to correct horizontal and vertical overscan/underscan using hardware scaling. Software must be able to disable and enable this feature.
B4.1.4.R.2 Adapter supports flicker filter and is required to take a 1024 x 768 32-bpp input and downscale it to TV-out resolution.
© 1999-2002 Microsoft Corporation. All rights reserved.