X hits on this document

PDF document

Part No. A 001 584 94 71, N° de pièce A 001 584 94 71 - page 14 / 14

46 views

0 shares

0 downloads

0 comments

14 / 14

Telephone / Software

Telephone

If a call is placed or received while the iPod® is in use the s and t assign- ments on the steering wheel switch to Telephone operation and the following options are available.

Answering a call: 1. Press s button.

The iPod® is muted. The instrument cluster multifunction display does not change. If you prefer, the Telephone menu in the multifunction display can be viewed by scrolling to it using ( or &.

Terminating a call: 1. Press t button.

iPod® playback resumes. The multi- function display in the instrument clus- ter briefly switches to the navigation mode of the iPod® menu and if no selection is made the multifunction dis- play switches back to the "iPod>" view.

Rejecting an incoming call: 1. Press t button.

When an incoming call is rejected the iPod® remains muted until the call goes to voicemail. The instrument cluster multifunction display does not change.

12

If you prefer, the Telephone menu in the multifunction display can be viewed by scrolling to it using ( or &.

Software

Video playback is possible from the software versions below onwards1:

iPod® Generation 4

-

iPod® Generation 5

1.2.0

iPod® photo

-

iPod® video

1.2.0

iPod® mini

-

iPod® U2

-

iPod® classic

1.0.3

iPod® 120GB classic

2.0.0

iPod® nano Generation 1

-

iPod® nano Generation 2

-

iPod® nano Generation 3

1.0.3

iPod® nano Generation 4

1.0.2

iPod® touch Generation 1

2.0.0

iPod® touch Generation 2

2.1.1

iPhone®

2.1.0

iPhone® 3G

2.1.0

1. For information on software updates, please contact your iPod® dealer and observe the notes in your iPod® User Guide.

Placing a call:

1. Press s provided the Telephone menu in the instrument cluster multi- function display is active.

For further information on how to place an outgoing call, refer to the COMAND Operator’s Manual (COMAND equipped vehicles) or the vehicle Operator’s Manual (Audio System equipped vehicles).

The iPod® is muted and the call is active. Placing an SOS or Tele Aid call: 1. Press L, ¡ or :

The iPod® is muted. "Connecting Call" will appear and remain in the instru- ment cluster multifunction display until the call is disconnected. The s and t switch to Telephone operation.

Or

1. Press "SEND" on the audio head unit.

The iPod® is muted. The instument cluster multifunction display does not change. If you prefer, the Telephone menu in the multifunction display can be viewed by scrolling to it using ( or &.

Document info
Document views46
Page views46
Page last viewedThu Dec 08 10:01:11 UTC 2016
Pages14
Paragraphs368
Words2878

Comments