X hits on this document

444 views

0 shares

0 downloads

0 comments

49 / 159

SME Specific MeasuresCompetitive and Sustainable Growth

Exploratory Award

Proposal number EXAW-1999-01124

AcronymMOMO

Proposal titleLOW COST IN MOULD MONITORING FOR HIGH SPEED RTM

AbstractThe European commercial industries require new materials with improved performance not

reached by the materials currently employed. In this way, composite materials are growing

in an important percentage. In the past the processing of organic composite parts was

related to techniques that are of low quality, low productivity and environmentally

unhealthy. In recent times the development of close mould technologies as RTM are

improving the quality and the environment. Although RTM presents a lot of advantages

currently the major limitation of the RTM process comes from the need to achieve higher

processing rates. Thus, HSRTM is been developed, but the possibilities of this technology

are limited by the lack of knowledge of how occurs into the mould. The objective of this

proposal is to develop of a monitored system for High Speed RTM process at low cost by

the use of a tool consisting on a commercial hardware and a simple software, in order to

control process parameters. This improvement of HSRTM process will allow: V    to

increase the number of parts/day. V    to optimise the production cycles, and V    to

demonstrate the feasability of HSRTM process for doing structural componerts at low cost.

all of them in confonnity with the marketplace demands: high quality, good prices and

friendly with the environment.

Key ActionGROW-1.   Key action: Innovative products, processes and organisation

Start date6/07/2000End date6/07/2001

Intended Step 2 projectCooperative Research (CRAFT)Duration Exploratory Phase6 months

SME CoordinatorSr NICOLAS JAROSLAVSKY LARREACompany sizeS2

LAMBDA COMUNICACIONES OPTICAS S.L

Parque Tecnologico de Vizcaya 206A

48170 - ZAMUDIO

Spain

Phone: 33944209410

Fax: 33944209413

Email: nicolas@lambda-com.es

Internet: www.lambada-com.es

SME Proposer(s)

ISOJET EQUIPEMENTSFranceS3

INDARPLAS, S.L.SpainS3

POLYSIER S.A.SpainS3

Profile of partners for joining the project

Business areas72 - Computer and related activities

25 - Manufacture of rubber and plastic products

Comments

Last update18/6/2001

Document info
Document views444
Page views444
Page last viewedWed Dec 07 20:26:39 UTC 2016
Pages159
Paragraphs5574
Words39087

Comments