X hits on this document

16 views

0 shares

0 downloads

0 comments

1 / 4

Installing a New Printhead in Your KODAK All-in-One Printer

1

5100, 5300, 5500

ESP 3/ESP 5

ESP 7/ESP 9

a) Follow these instructions for step-by-step guidance on how to

remove and replace your printhead.

b) If your printer is not powered on, press ON.

c) Lift the printer access door and wait for the carriage to move to the access position.

d) Remove any paper that may be loaded in the printer.

2

Remove Ink Cartridges and Used Printhead

1

5100, 5300, 5500

ESP 3/ESP 5/ESP 7/ESP 9

a) Remove both ink cartridges and set them aside.

b) Unlatch the used printhead. 5000 Series: press the button on the left, as shown.

c) Lift the used printhead out of the carriage.

ESP 3/ESP 5/ESP 7/ESP 9: Lift the button in the center of the carriage, as shown.

Eastman Kodak Company Rochester, NY 14650 U.S.A. © Eastman Kodak Company, 2008 MC/MR/TM: Kodak, EasyShare.

1

Document info
Document views16
Page views16
Page last viewedFri Dec 02 19:05:40 UTC 2016
Pages4
Paragraphs69
Words559

Comments