X hits on this document

18 views

0 shares

0 downloads

0 comments

4 / 4

7

Load Paper and Calibrate (ESP 7 and ESP 9 Printers Only)

a) Raise the output tray and pull the bottom paper tray out.

b) Load plain paper and slide the two paper edge guides against the left and front edge of the paper.

c) Close the bottom tray. Note: If the paper tray will not close all the way, press the legal paper extender tab on the front left edge of the tray while pushing the tray in.

Need More Help?

For printer support, please go to www.kodak.com/go/aiosupport or www.kodak.com/go/contact.

AUR1780-2

OK

d) Press START. Wait 2 to 3 minutes for the calibration sheet to print.

4

Document info
Document views18
Page views18
Page last viewedSun Dec 04 08:18:26 UTC 2016
Pages4
Paragraphs69
Words559

Comments