X hits on this document





7 / 24

Wide Format Lamination GBC AUSTRALIA

Titan 100 Series


Wide Format Laminator



Wide Format Laminator

The professional wide format laminator, available in two widths: 1100mm and 1600mm. The Titan is the perfect machine to produce a wide range of services in

a copy shop environment or in a copy centre, graphic printing shop or photo shop. Features hot and cold lamination, speed control, top and bottom independent temperature control, mounting onto 12mm foamboard, 8 bit microprocessor controlling pre-set function and variable pressure control. Rewinder and stand included.

The Panda 1600 is designed to protect and enhance the wide varieties of inkjet prints which are heat sensitive and thus cannot be finished using thermal activated film. The Panda 1600 has heat-assist options to achieve a clear finish instantly and mounts prints up to 1580mm wide using pressure sensitive film & foam boards.

GBC 2064


Wide Format Laminator

The GBC 2064WF is designed for professional mounting & lamination of stock up to 1627mm wide and 25mm thick. All process parameters such as temperature are digitally displayed, with speed and pressure having the ability to be set independently. Fast roll changes are a breeze with swing out shafts making it both safe and easy for the operator.

Studiojet 1650


Wide Format Laminator

The Studiojet 1650 is an entry level laminator to cold laminate and board mount, wide-format prints up to 1650mm in width. Commonly used to create decals, floor graphics, window graphics, displays, banners and POP boards etc. Studiojet 1650 is simple to use, incorporates a built-in rewind shaft for the release liner and has mounting capability of up to 10mm thick board.

PSA Films


Pressure Sensitive Films

GBC’s full line of pressure-sensitive films and adhesives are designed for laminating heat-sensitive output. From banners and signs to floor and window graphics, you’ll see the difference GBC Arctic films can make.

Pressure sensitive films are available for indoor and outdoor applications in a variety of substrates and finishes such as: gloss, matt, luster and textured. Arctic mounting films are constructed with a thin polyester carrier film coated on two sides with adhesives. One side provides a permanent bond to the graphic, the other is coated with permanent or removable adhesive for both long and short term applications.


Document info
Document views44
Page views44
Page last viewedFri Oct 21 11:27:03 UTC 2016