Part No. 19140504RC NISSAN
Electric wiring kit for towbars / 7-pin / 12N / 12 Volt / ISO 1724
Installation of the towing electrics kit must be undertaken by a specialist workshop or an appropriately qualified person. Before starting work, you must read the installation instructions through completely. After installing the towing electrics kit, the installation instructions should be kept with the vehicle service documentation.
In case of missing a rear fog lamp on the trailer, it should be retrofitted.
We accept no responsibility and give no guarantee for technical and electrical modifications made after the initial operation of the towing electrics kit by the vehicle manufacturer and which may lead, for example to malfunction of the trailer socket or its peripheries.
All claims under the guarantee will lapse in case of improper use or modification of the towing electrics kit or any of its component parts. When driving without a trailer or load carrier, any adapter installed must be removed from the electrical socket. We reserve the right to alter the design, content or colour. We accept no liability for any errors in these instructions. All details and illustrations are non- binding.
The trailer module is not diagnostics-capable. If the manufacturer’s diagnostics processes or software-supported test mechanisms generate error reports directly or indirectly linked with trailer operation, the trailer module must be disconnected from the leads to the trailer socket and a new diagnostic process initiated.
87140601 / 24.02.2009
© ConWys AG
Right Connections (UK) Limited 7 Churchill Buildings, Queen Street, Wellington, Telford, Shropshire TF1 1HT
+44 0871 226 2030 Fax - UK only: 0870 759 8366
Web: www.rightconnections.co.uk email: firstname.lastname@example.org