X hits on this document

PDF document

User's%20Manual%20of%20ET-STAMP-STM32.pdf - page 6 / 12

32 views

0 shares

0 downloads

0 comments

6 / 12

User’s Manual of Board Microcontroller “ET-ARM STAMP STM32 (Cortex-M3)

Download Hex File into MCU of Board

To download Hex File into Flash Memory of MCU inside

board is to “STMicroelectronics”

use that

Program

Flash

is

connected

to

Loader

of

MCU

through

Serial Port of Computer PC. This downloaded free from website www.st.com.

program

can

be

Procedures to Download HEX File into MCU

Cable PC and

between RS232 Board USART1. and user can see

Serial Port

board

that LED PWR

1. Interface

RS232

Communication

of

2. Supply

power

into

is in status ON. 3. Run Program Flash Loader;

it will below;

show

the

result

if it is version demo 1.1, as shown in the picture

4. Set initial values ET-ARM STAMP STM32 program as follows;

for program; if using with Board of ETT, please set values into

4.1

Set COM Port according to the actually used

COM Port number (in the example, it is COM4).

WWW.ETT.CO.TH

5

Document info
Document views32
Page views32
Page last viewedWed Jan 18 02:09:03 UTC 2017
Pages12
Paragraphs449
Words1974

Comments