Working in the command-line mode
Deletes a partition.
Supported options: /partition:[partition number]
Specifies the partition will be deleted. The list of available partitions is provided by /list command Partition numbers are specified as <disk number>- <partition number>, e.g.: /partition: 1-1,1-2,3-1.
/resize_partition Resizes the existing partition.
Options /partition:[partition number]
Specifies the partition number. /size:[partition size in sectors]
Sets the new partition size (in sectors).
Lists the available partitions on the hard disks.
diskdirectorcmd.exe usage examples
Create a partition
diskdirectorcmd /create partition /start:12000 /size:20000 /harddisk:1 [/filesystem:fat16 /label:new] [/type:logical
This will create a logical FAT16-formatted partition labeled NEW on the first hard drive. This partition will be took 20 000 physical sectors starting with sector number 12000.
2. Delete a partition diskdirectorcmd /delete_partition /partition:1-4
This will delete a fourth-partition from the first hard drive.
Copyright © Acronis, Inc., 2000–2010