The model 92T continues to set the industry standard for accuracy, versatility, ease of operation, and display of information with high resolution.
As with the model IT 503, Izod and Charpy impact fixtures can be easily added and removed via the T-slotted block, making the 92T one of the most versatile machines available.
Aerodynamic compound pendulum
Selectable energy units of J, in.lbf, ft.lbf, kgf.m and kgf.cm
Selectable strength calculations in ft.lbf/in, J/m, in.lbf/in, kgf.m/m, ft.lbf/in2, kJ/m2, in.lbf/in2, or kgf.m/m2
Break type input options of Complete, Hinge, Partial, Non-break, and Necking
Automatic or manual Toss correction
Auto calibration for bearing windage and friction
Automatic or manual update of specimen number
Real time display of energy is available for verifying the display accuracy against traceable measurements of pendulum height and weight
Hot and cold chambers
Instrumentation package for impact
Separate 1J and 0.5J hammers
BASIC PENDULUM CAPACITY
WITH LOW BLOW
INCREASED PENDULUM CAPACITY
Model 92T shown with hot and cold chamber.
Optional weight sets, clamps, anvils, and striking tups.
2.75 to 2
2.03 to 1.475
24.38 to 17.73
Close-up of Charpy test setup.
660 x 380 x 840
26 x 15 x 33
110/220 VAC, 50/60 Hz, 1ph
J ft.lb ft.lb
add-on weights available for up to 25 J add-on weights available for up to 18.44 ft.lb add-on weights available for up to 221.63 in.lb
Model 92T Plastics Impact Tester.