X hits on this document

589 views

0 shares

4 downloads

0 comments

100 / 133

OS Error: 10091

Indication

Possible Solution

The underlying network subsystem is not ready for network communication.

Wait a few seconds and restart the driver.

10067

The limit on the number of tasks supported by the Windows Sockets implementation has been reached.

Close one or more applications that may be using Winsock and restart the driver.

Allen-Bradley ControlLogix Ethernet Driver Help

100

Winsock V1.1 or higher must be installed to use the Allen-Bradley ControlLogix Ethernet device driver

Error Type: Fatal

Possible Cause: The version number of the Winsock DLL found on the system is less than 1.1.

Solution: Upgrade Winsock to version 1.1 or higher.

Device Specific Error Messages

The following is a list of device specific error topics. Click on a link for more information about that specific error message.

Device Specific Error Messages Allen-Bradley ControlLogix Ethernet '<Device>': CIP Connection Size <requested> is not supported by this device. Automatically falling back to 500 bytes Device '<device name>' is not responding Encapsulation error occurred during a request to device '<device name>'. [Encap. Error=<code>] Error occurred during a request to device '<device name>'. [CIP Error=<code>, Ext. Error=<code>] Frame received from device '<device name>' contains errors Unable to retrieve the Identity for device '<device>'. [CIP Error=<error>, Ext. Error=<error>]. All tags will use Symbolic Protocol Mode Unable to retrieve the Identity for device '<device>'. [Encap. Error=<error>]. All tags will use Symbolic Protocol Mode Unable to retrieve the Identity for device '<device>'. Frame received contains errors. All tags will use Symbolic Protocol Mode

Allen-Bradley ControlLogix Ethernet '<Device>': CIP Connection Size <requested> is not supported by this device. Automatically falling back to 500 bytes

Error Type: Warning

Possible Cause: The requested CIP Connection Size is not supported by the device.

Solution: Change the CIP Connection Size to one that is supported by the device.

See Also: Logix Communications Parameters

Device '<device name>' is not responding

Error Type: Warning

www. kepware.com

Document info
Document views589
Page views611
Page last viewedMon Jan 16 17:21:35 UTC 2017
Pages133
Paragraphs5515
Words40931

Comments