X hits on this document

545 views

0 shares

4 downloads

0 comments

111 / 133

111

Allen-Bradley ControlLogix Ethernet Driver Help

Possible Cause: A project download was attempted while the device was synchronizing with the controller project.

Solution: No action is required. The driver will re-attempt synchronization after a period of 30 seconds.

Note: Project synchronization is required for the Logical Addressing Modes.

Unable to read '<element>' element(s) starting at '<address>' on device '<device name>'. Native Tag size mismatch

Error Type: Warning

Possible Cause: The Native Tag's size (footprint) does not match the expected size that was determined from the project upload.

Solution: Contact Technical Support to report the issue. Then, change the Protocol Mode to Symbolic as a workaround.

Unable to read tag '<tag name>' on device '<device name>'. Native Tag size mismatch

Error Type: Warning

Possible Cause: The Native Tag's size (footprint) does not match the expected size that was determined from the project upload.

Solution: Contact Technical Support to report the issue. Then, change the Protocol Mode to Symbolic as a workaround.

Unable to write to tag '<tag name>' on device '<device name>'. Native Tag size mismatch

Error Type: Warning

Possible Cause: The Native Tag's size (footprint) does not match the expected size that was determined from the project upload.

Solution: Contact Technical Support to report the issue. Then, change the Protocol Mode to Symbolic as a workaround.

ENI/DH+/ControlNet Gateway Specific Error Messages

The following is a list of sub type error topics. Click on a link for more information about that specific error message.

ENI/DH+/ControlNet Gateway Specific Error Messages

Device '<device name>' is not responding. Local node responded with error '[DF1 STS=<value>]' Unable to read '<block size>' element(s) starting at '<address>' on device '<device name>'. [DF1 STS=<value>, EXT STS=<value>]. Tag(s) deactivated Unable to read '<block size>' element(s) starting at '<address>' on device '<device name>'. Frame received contains errors Unable to write to address <address> on device '<device name>'. [DF1 STS=<value>, EXT STS=<value>] Unable to write to address <address> on device '<device name>'. Frame received contains errors Unable to write to address <address> on device '<device name>'. Local node responded with error ' [DF1 STS=<value>]' Unable to write to function file <address> on device '<device name>'. Local node responded with error '[DF1 STS=<value>]'

www. kepware.com

Document info
Document views545
Page views567
Page last viewedFri Dec 09 08:11:43 UTC 2016
Pages133
Paragraphs5515
Words40931

Comments