X hits on this document

528 views

0 shares

4 downloads

0 comments

16 / 133

Designator IP/Host Name 1

Designator Type* N/A Port ID

Description 1788-ENBT IP Address or host name. Port to backplane.

Formats Decimal Decimal Decimal

Range 0-255 1 *

Optional Routing Path

Multiple Link, Port pairs

Specifies a way out of the 1788-ENBT interface module and must equal 1 (port to the back plane).

CPU Slot

Link Address

Slot Number of the FlexLogix processor.

Decimal

0-255

Allen-Bradley ControlLogix Ethernet Driver Help

<IP or Hostname>,1,[<Optional Routin

g Path>],<CPU Slot>

16

*For more information, refer to Connection Path Specification.

<IP or Hostname>,1,[<Optional Routing Path>],<CPU Slot>

SoftLogix 5800 Device ID

The Device ID specifies the SoftLogix PC IP address, as well as the virtual slot number in which the controller CPU resides. Device IDs are specified as the following:

Example 123.123.123.123,1,0

This equates to 1788-ENBT IP of 123.123.123.123. The Port ID is 1 and the CPU resides in slot 0.

Designator

Designator Type*

Description

IP/Host Name

N/A

SoftLogix PC NIC IP Address or host

1

Port ID

name. Port to backplane.

Optional Routing Path

Multiple Link, Port pairs

Specifies a way out of the EtherNet/IP Messaging module and must equal 1 (port to the virtual back plane).

CPU Slot

Link Address

Slot Number of the SoftLogix processor in the virtual backplane.

Decimal

1

Decimal

*

Decimal

0-255

Formats

Range

Decimal

0-255

*For more information, refer to Connection Path Specification.

Example 123.123.123.123,1,1

This equates to SoftLogix PC IP Address of 123.123.123.123. The Port ID is 1 and the CPU resides in slot 1.

Note: For information on supplementing a Device ID with a routing path to a remote back plane, refer to Communications Routing.

See Also: SoftLogix 5800 Connection Notes

Logix Communications Parameters

www. kepware.com

Document info
Document views528
Page views550
Page last viewedThu Dec 08 06:31:08 UTC 2016
Pages133
Paragraphs5515
Words40931

Comments