X hits on this document

531 views

0 shares

4 downloads

0 comments

25 / 133

25

Allen-Bradley ControlLogix Ethernet Driver Help

Ethernet/IP Interface module. Local CPU with a serial port. Remote ControlLogix, CompactLogix, FlexLogix, or SoftLogix CPU with a serial port.

Note 1: Local and Remote CPUs must be on the same serial network.

Note 2: Serial Gateway models do not support automatic tag database generation.

Serial Gateway Device ID

The Device ID specifies the local device IP address as well as the remote device Station ID necessary for making a connection. Device IDs are specified as the following:

<IP or Hostname>,1,[<Optional Routing Path>],<CPU Slot>.<Serial Port Channel>.<Station ID (dec)>

Designator IP/Host Name 1

Designator Type* N/A Port ID

Description IP Address or host name. Port to backplane.

Formats Decimal Decimal

Range 0-255 1 *

Optional Routing Path

Multiple Link, Port pairs

Specifies a way out of the EtherNet/IP interface module and must equal 1 (port to the back plane).

Decimal

CPU Slot

Link Address

Slot Number of the CPU module that contains the Serial Port used for communications.

Decimal

0-255

Serial Port Channel

Serial Port Channel to use.

Alpha

A and B

Station ID

DF1 Station ID of target PLC in Decimal Format.**

Decimal

0-255

*For more information, refer to Connection Path Specification.

Example 123.123.123.123,1,0.A.3

This equates to an EtherNet/IP of 123.123.123.123. The CPU card resides in slot 0: use Channel A (Serial Port) and addressing target Station ID 3 (dec).

Note 1: For information on supplementing a Device ID with a routing path to a remote serial node, refer to Communications Routing.

Note 2: For more information on communications parameters, refer to Logix Communications Parameters.

Note 3: When configuring the Device ID, users should verify that the device can be detected using the same route through RSLinx.

MicroLogix 1100 Setup

MicroLogix 1100 Device ID The Device ID specifies the IP address of the MicroLogix 1100. Device IDs are specified as the following:

<IP or Hostname>

Designator

Designator Type

IP/Host Name

N/A

Description IP Address or host name.

Formats

Range

Decimal

0-255

Example 123.123.123.123

This equates to an IP of 123.123.123.123.

Note: For more information on communications parameters, refer to ENI DF1/DH+/ControlNet Gateway Communications Parameters.

ENI DF1/DH+/ControlNet Gateway Communications Parameters

www. kepware.com

Document info
Document views531
Page views553
Page last viewedThu Dec 08 10:10:01 UTC 2016
Pages133
Paragraphs5515
Words40931

Comments