Allen-Bradley ControlLogix Ethernet Driver Help
Once the project is loaded, remove all groups except those containing tags of interest. Statistics and System tags, for example, are not needed.
Note: For small projects, set the Group Update Rate to 0-10 ms. For large projects, set the rate to 10- 50 ms.
Next, click Tools | Test Mode.
Then, select Test 8. Activate items on start. Deactivate items on stop and then set a test interval.
Note: Since this project is fairly small, the interval has been set to 2 minutes. For larger projects, the interval should be increased in order to get a more accurate reading.