X hits on this document

499 views

0 shares

4 downloads

0 comments

39 / 133

39

Allen-Bradley ControlLogix Ethernet Driver Help

Note: This is the control set for comparisons.

  • 17.

    In the server, set the Protocol Mode to Logical Non-Blocking.

  • 18.

    Connect to the server using Quick Client. Then, click Tools | Test Mode and enable test mode.

Note: Data reading will begin. When the test interval expires, all tags will be deactivated and the driver will cease all statistics gathering. The results can then be viewed.

  • 19.

    Disconnect the Quick Client from the server and then shutdown the server.

  • 20.

    Next, re-launch the server and then search its Event Log for statistics. The image below displays the

second trial utilizing Logical Non-Blocking for the device.

Note: The image below displays the second trial utilizing Logical Non-Blocking for the channel and driver.

www. kepware.com

Document info
Document views499
Page views521
Page last viewedMon Dec 05 14:38:39 UTC 2016
Pages133
Paragraphs5515
Words40931

Comments