X hits on this document

553 views

0 shares

4 downloads

0 comments

7 / 133

7

Allen-Bradley ControlLogix Ethernet Driver Help

Allen-Bradley ControlLogix Ethernet Driver Help Help version 1.102

CONTENTS

Overview What is the Allen-Bradley ControlLogix Ethernet Driver?

Device Setup How do I configure a device for use with this driver?

Communications Routing How do I communicate with a remote ControlLogix 5000 processor or 1756-DHRIO/1756-CNB Interface Module?

Performance Optimizations How do I get the best performance from the Allen-Bradley ControlLogix Ethernet Driver?

Data Types Description What data types does this driver support?

Address Descriptions How do I address a tag on a Allen-Bradley ControlLogix Ethernet device?

Automatic Tag Database Generation How can I easily configure tags for the Allen-Bradley ControlLogix Ethernet Driver?

Error Descriptions What error messages does the Allen-Bradley ControlLogix Ethernet Driver produce?

Error Codes What are the Allen-Bradley ControlLogix Ethernet error codes?

Reference Material Where can I find additional information relating to the Allen-Bradley ControlLogix Ethernet Driver?

Overview

The Allen-Bradley ControlLogix Ethernet Driver provides an easy and reliable way to connect Allen-Bradley ControlLogix Ethernet controllers to OPC client applications, including HMI, SCADA, Historian, MES, ERP, and countless custom applications.

Supported Allen-Bradley Controllers

ControlLogix 5500 Series Communications with ControlLogix can be accomplished through an EtherNet/IP communication module for Ethernet communications or through a 1761-NET-ENI module for Ethernet-to-serial communications using the controller's serial port.

CompactLogix 5300 Series Ethernet communications with CompactLogix requires a processor with a built-in EtherNet/IP port such as the 1769-L35E. Communications with CompactLogix otherwise requires a 1761-NET-ENI module for Ethernet-to- serial communications using the controller's serial port.

FlexLogix 5400 Series Communications with FlexLogix can be accomplished through a 1788-ENBT daughtercard for Ethernet communications or through a 1761-NET-ENI module for Ethernet-to-serial communications using the controller's serial port.

SoftLogix5800

The driver supports the Allen-Bradley SoftLogix5800 Series Controller and requires an Ethernet card in the SoftLogix PC.

DataHighwayPlus Gateway

The driver supports the PLC-5 Series and SLC 500 Series with a Data Highway Plus interface. This is accomplished through a DH+ gateway and requires one of the aforementioned PLCs, an EtherNet/IP communication module, and a 1756-DHRIO-interface module (both residing in the ControlLogix rack).

www. kepware.com

Document info
Document views553
Page views575
Page last viewedFri Dec 09 18:54:56 UTC 2016
Pages133
Paragraphs5515
Words40931

Comments