X hits on this document

532 views

0 shares

4 downloads

0 comments

9 / 133

9

Allen-Bradley ControlLogix Ethernet Driver Help

Device Setup

Supported Devices Device

Communications

ControlLogix 5550 / 5553 / 5555 / 5561 / 5562 / 5563 / 5564 / 5565 / 5571 / 5572 / 5573 / 5574 / 5575 processors

Via 1756-ENBT / ENET / EN2F / EN2T / EN2TR / EN3TR / EWEB / EN2TXT Ethernet module.

Via Serial Gateway.

CompactLogix 5320 / 5323 / 5330 / 5331 / 5332 / 5335 / 5343 / 5345 / 5370

Via 1761-NET-ENI Series B or higher using Channel

  • 0

    (Serial).

Built-in EtherNet/IP port on processors with E suffix.*

FlexLogix 5433 / 5434 processors

SoftLogix 5810 / 5830 / 5860 processors

MicroLogix 1000 / 1200 / 1500

MicroLogix 1100 / 1400

Via Serial Gateway.

Via 1761-NET-ENI Series B or higher using Channel

  • 0

    (Serial).

Via 1788-ENBT Ethernet Daughtercard.

Via Serial Gateway.

Via 1761-NET-ENI Series B or higher using Channel

  • 0

    (Serial).

Via SoftLogix EtherNet/IP Messaging module.

Via Serial Gateway. Via 1761-NET-ENI.

Via EtherNet/IP Gateway. Via MicroLogix 1100 / 1400 Channel 1 (Ethernet).

Via 1761-NET-ENI.

SLC 500 Fixed I/O Processor

Via EtherNet/IP Gateway. Via 1761-NET-ENI.

SLC 500 Modular I/O Processors (SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04, SLC 5/05)

Via EtherNet/IP Gateway. Via DH+ Gateway.**

Via 1761-NET-ENI.

PLC-5 series (excluding the PLC5/250 series)

Via EtherNet/IP Gateway. Via DH+ Gateway.

Via 1761-NET-ENI.

PLC-5/20C, PLC-5/40C, PLC-5/80C

Via EtherNet/IP Gateway Via ControlNet Gateway.

Via 1761-NET-ENI.

Via EtherNet/IP Gateway.

*For example, 1769-L35E. **This driver supports any SLC 500 series PLC that supports DH+ or that can be interfaced to a DH+ network (such as the KF2 interface module).

Firmware Versions Device ControlLogix 5550 (1756-L1) ControlLogix 5553 (1756-L53)

Version 11.35 - 13.34 11.28

www. kepware.com

Document info
Document views532
Page views554
Page last viewedThu Dec 08 12:04:57 UTC 2016
Pages133
Paragraphs5515
Words40931

Comments