X hits on this document

630 views

0 shares

4 downloads

0 comments

97 / 133

97

Allen-Bradley ControlLogix Ethernet Driver Help

Error Descriptions

Error messages are classified according to error sub types. For more information, select a link from the list below.

Address Validation Errors Communication Errors Device Specific Error Messages ControlLogix Specific Error Messages ENI/DH+/ControlNet Gateway Specific Error Messages Automatic Tag Database Generation Errors

Address Validation Errors

The following is a list of sub type error topics. Click on a link for more information about that specific error message.

Address Validation Address '<address>' is out of range for the specified device or register Array size is out of range for address '<address>' Array support is not available for the specified address: '<address>' Data Type '<type>' is not valid for device address '<address>' Device address '<address>' contains a syntax error Device address '<address>' is not supported by model '<model name>' Device address '<address>' is Read Only Memory could not be allocated for tag with address '<address>' on device '<device name>' Missing address

Address '<address>' is out of range for the specified device or register

Error Type: Warning

Possible Cause:

A tag address that has been specified statically references a location that is beyond the range of the device's supported locations.

Solution: Verify that the address is correct; if it is not, re-enter it in the client application.

Note: For valid bit and array element ranges, refer to Address Formats.

Array size is out of range for address '<address>'

Error Type: Warning

Possible Cause: A tag address that has been specified statically is requesting an array size that is too large.

Solution:

  • 1.

    Specify a smaller value for the array.

  • 2.

    Specify a different starting point by re-entering the address in the client application.

Note: For valid array size ranges, refer to Address Formats.

Array support is not available for the specified address: '<address>'

Error Type: Warning

www. kepware.com

Document info
Document views630
Page views652
Page last viewedWed Jan 18 13:09:19 UTC 2017
Pages133
Paragraphs5515
Words40931

Comments