X hits on this document





65 / 94

Saving and Converting Audio Files

Expert button

Opens the Advanced area where you can configure Expert Features.

Expert Features advanced area

Original Bit check box

Sets the original bit in the music file; the copy and original are differentiated.

Check box enabled: Original Bit = 1, i.e. original. Check box disabled: Original Bit = 0, i.e. copy.

Private Bit check box

Sets the private bit in the music file. It is reserved for the user and is only used for informational purposes.

Copyright Bit check box

Sets the copyright bit in the music file which identifies protected content.

Check box enabled: Copyright Bit = 1, i.e. protected. Check box disabled: Copyright Bit = 0, i.e. not protected.

Write CRC check box

Also sets a checksum in the music file that should ensure that transfer errors are identified.

Allow intensity stereo coding check box

Uses a special codec at high frequencies that only saves the directional information and volume.

Allow downmix check box

Mixes two stereo channels down to one mono signal. This option is useful when the output data is of such poor quality that a poor stereo signal is to be expected. An increase in quality is expected when downmixing to mono.

Padding combo box

Selects a padding type for MP3 blocks. We recommend padding type ISO that pads MP3 blocks according to the ISO specification.

13.2 Saving Audio Files

Using Nero Burning ROM you can store audio files from an audio CD on the hard drive. In the process, the files are encoded, i.e. converted into a format that the computer can read. The audio file is usually also compressed.

Audio files from copy-protected audio CDs cannot be saved using Nero Burning ROM.

To save audio files, proceed as follows:

  • 1.

    Insert the desired audio CD into a drive.

  • 2.

    Click on the Extras > Save Tracks button.

Æ The Save Tracks window is opened.

  • 3.

    If you want to save only specific audio files, select the audio files that you want to save in the Track list.

  • 4.

    Select the required output format from the Output file format drop-down menu.

  • 5.

    If you want to define the encoding options:

    • 1.

      Click on the Settings button.


A window is opened.

Nero Burning ROM


Document info
Document views364
Page views364
Page last viewedSun Jan 22 07:55:28 UTC 2017