X hits on this document

287 views

0 shares

0 downloads

0 comments

73 / 94

LabelFlash™

15

LabelFlash™

If you have connected up a LabelFlash™ burner, you can also use Nero Burning ROM to print a label on the label and/or data side of a LabelFlash™ DVD.

The LabelFlash™ DVD has a special layer in the center of each side; when this is heated by the laser in the burner it is altered so that images and text are printed on the DVD. LabelFlash™ is a technology that enables both the label and the data side of DVDs in the burner to be printed. If the data side is printed, this is referred to as the DiscT@2™ procedure.

This feature is only available with a LabelFlash™ burner.

15.1 Burn Label Window

In the Burn Label window you can create or load a label and print it on a LabelFlash™ DVD.

The window is opened when you insert a blank LabelFlash™ disc or click on the the toolbar.

icon in

The interface in the Burn Label window works on the same principle as Nero

CoverDesigner. Basically, it is irrelevant whether you print the label on paper or directly onto an appropriate disc.

Please see the separate Nero CoverDesigner user manual for full instructions on how to make professional looking covers and labels.

Fig. 24: Burn Label window for LabelFlash™/DiscT@2™

Information on the selected printing quality and rotation speed is displayed on the right-hand side of the screen. Under Disc type you can see whether the blank disc has been inserted with the label or data side. Either the LabelFlash™ or the DiscT@2™ logo is displayed in the Burn Label window depending on which side is inserted.

Nero Burning ROM

73

Document info
Document views287
Page views287
Page last viewedSat Dec 10 08:27:38 UTC 2016
Pages94
Paragraphs2766
Words25813

Comments