X hits on this document





74 / 94


The screen offers the following setting options:

Inner radius Width

Defines the distance between the label and the inner edge. Defines the width of the print area. Opens the LabelFlash™ Print Properties window.

Printing quality

This is where you can change the printing quality and the contrast level and display the changes made directly in the print preview.


Opens the Print Preview window that shows how the label should appear on the LabelFlash™ disc.

Label templates

Contains a selection of different templates for designing the label. You can continue to edit and customize a selected template.

Burn Cancel

Starts the print process. Cancels the process and closes the window.

If you are creating a DiscT@2, Nero Burning ROM displays only the available print area for creating the label by default, i.e. the area on the data side of your DVD that is not already taken up by data. You cannot increase the radius of the print area.

15.2 Printing LabelFlash™ Labels and DiskT@2

Basically, it is irrelevant whether you print on the label or the data side when creating labels. The label is actually printed outside the normal burn process.

You can print on the label side of the DVD at any time. We recommend that you print on the data side first when you have burned the compilation. It is not possible to burn data on a printed data side. When you insert a DVD on which data has already been burned, Nero Burning ROM automatically identifies the space that is still available on the data side and on which you can print.

To print a LabelFlash™ label on the front or a DiscT@2™ label on the flipside, proceed as follows:

  • 1.

    If you want to print a LabelFlash™ label on the label side, insert a blank LabelFlash™ disc into the burner with the label side facing down. Æ The Burn Label window is opened with the LabelFlash™ logo.

  • 2.

    If you want to print a DiskT@2 on the data side, insert a blank LabelFlash™ disc with the data side facing down into the burner. Æ The Burn Label window is opened with the DiskT@2™ logo.

  • 3.

    Create a label according to your requirements or open a label (File > Open menu) that you have already created with Nero CoverDesigner. The interface in the Burn Label window and the process for creating a label work on the same principle as Nero CoverDesigner. Please see the Nero CoverDesigner user manual for full instructions on how to make professional looking covers and labels.

  • 4.

    If you want to change the area in which the label is printed, change the print area accordingly using the text boxes Inner Radius and Width.

  • 5.

    If you want to view or change the print properties:

  • 1.

    Click on the Change button. Nero Burning ROM


Document info
Document views173
Page views173
Page last viewedWed Oct 26 13:53:46 UTC 2016