X hits on this document

117 views

0 shares

0 downloads

0 comments

18 / 40

Basic Settings

Some of the following settings are required after connecting and positioning your speakers while others will make operations easier. You can use QUICK SPEAKER SETUP to easily set up your speaker configuration.

Quick Speaker Setup

Remote NOT

Quick Speaker Setup helps you to easily and quickly register the speaker size and speaker distance according to your listening room to create the best possible surround effect.

  • You can also register each speaker’s information manually.

For details, see page 18.

5

Press in MULTI JOG (PUSH SET). “COMPLETE” appears on the display, then goes back to the source indication.

Note:

This procedure will not be completed if you stop in the middle of the setting process.

CH

L/R

C

LS/RS

S.WFR

2.0CH

LARGE

NONE

NONE

NO

2.1CH

SMALL

NONE

NONE

YES

3.0CH

LARGE

SMALL

NONE

NO

3.1CH

SMALL

SMALL

NONE

YES

4.0CH

LARGE

NONE

SMALL

NO

4.1CH

SMALL

NONE

SMALL

YES

5.0CH

LARGE

SMALL

SMALL

NO

5.1CH

SMALL

SMALL

SMALL

YES

Speaker channel number and speaker size

You can find how each of the speaker size is defined according to the number of connected speakers (speaker channel “CH” number) you select.

  • Subwoofer (S.WFR) is counted as 0.1 channel.

The size of the connected speakers

Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1 Press QUICK SPEAKER SETUP. “SPK=” and the initial speaker channel number appear.

2 Turn MULTI JOG to select an appropriate number of the connected speakers (speaker

channel number). As you turn the jog, the speaker channel number changes as follows.

  • For the details of speaker channel number, see “Speaker channel number and speaker size.” Room size and speaker distance/output level According to the selected room size, speaker distance and speaker output level for each activated speaker is set as follows:

5.0CH 5.1CH 2.0CH 2.1CH 3.0CH 3.1CH 4.0CH 4.1CH (Back to the beginning)

3 Press in MULTI JOG (PUSH SET). “ROOM SIZE=” and the initial room size setting appear.

4 Turn MULTI JOG to select an appropriate room

size to match to your listening room. As you turn the jog, the room size changes as follows.

  • To select your appropriate room size, see “Room size and

speaker distance/output level.”

Room size

Speaker

L

L/R

(Large)

C

LS/RS

M

L/R

(Medium)

C

LS/RS

S

L/R

(Small)

C

LS/RS

Distance

Output level

3.0 m (10 ft) 3.0 m (10 ft) 3.0 m (10 ft) 2.7 m (9 ft) 2.4 m (8 ft) 2.1 m (7 ft) 2.4 m (8 ft) 2.1 m (7 ft) 1.5 m (5 ft)

0 dB 0 dB 0 dB 0 dB –2 dB –3 dB 0 dB –2 dB –4 dB

L (Large)

S (Small) M (Medium)

Notes:

  • In the tables above, “L” stands for the left front speake , “R” for the right front speake , “C” for the center speake , “LS” for the left surround speake , “RS” for the right surround speake , and “S.WFR” for the subwoofer.

  • Once Quick Speaker Setup is performed, the speaker output levels are also set to appropriate values automatically (common to all sources). If you want to set the speaker output levels separately for each source, see “Adjusting the Speaker Output Levels” on page 22.

16

Document info
Document views117
Page views112
Page last viewedMon Dec 05 05:35:45 UTC 2016
Pages40
Paragraphs2251
Words16130

Comments