X hits on this document

137 views

0 shares

0 downloads

0 comments

19 / 40

Basic Setting Items

On the following pages, you can adjust the following items:

  • You can only select the items currently available. For details, see

the explanation of each item.

Basic Procedure

Remote NOT

FRONT L DIST*

Register the distance from the left front speaker to your listening point.

18

FRONT R DIST*

Register the distance from the right front speaker to your listening point.

18

CENTER DIST*

Register the distance from the center speaker to your listening point.

18

SURR L DIST*

Register the distance from the left surround speaker to your listening point.

18

SURR R DIST*

Register the distance from the right surround speaker to your listening point.

18

SUBWOOFER OUT

Select the type of the sounds emitted from the subwoofer.

18

CROSSOVER

Select the cutoff frequency to the subwoofer.

19 19 19 19 20

LFE ATTENUATE MIDNIGHT MODE DUAL MONO VIRTUAL SBACK DIGITAL IN

Attenuate the bass (LFE) sounds. Reproduce a powerful sound at night. Select the Dual Mono sound channel. Turn on or off Virtual Surround Back.

Select the component connected to digital input terminal.

20

1 Press SETTING. The last selected item appears on the display.

2 Turn MULTI JOG until an item you want appears on the display.

  • In this example, select “VIRTUAL SBACK.” For available

items, see the list “Basic Setting Items.”

3 Press in MULTI JOG (PUSH SET). The current setting for the selected item appears on the display.

Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

Ex. When setting Virtual Surround Back to “VRTL SB ON.”

Items SUBWOOFER* FRNT SPEAKERS* CNTR SPEAKER* SURR SPEAKERS* DISTANCE UNIT

To do Register your subwoofer. Register your front speaker size. Register your center speaker size. Register your surround speaker size. See page 18 18 18 18

Select the measuring unit for the speaker distance.

18

Note:

  • *

    These items can be set using Quick Speaker Setup.

4 Turn MULTI JOG until a setting you want appears on the display.

5 Press in MULTI JOG (PUSH SET).

6 Repeat steps 2 to 5 to set other items if necessary.

7 Press EXIT. The source indication resumes on the display.

17

Document info
Document views137
Page views132
Page last viewedSat Dec 10 02:21:57 UTC 2016
Pages40
Paragraphs2251
Words16130

Comments