X hits on this document

107 views

0 shares

0 downloads

0 comments

22 / 40

Basic Settings

Setting for Effective Surround Operations Virtual Surround Back—VIRTUAL SBACK

You can enjoy the surround back channel while playing back Dolby Digital Surround EX software or DTS-ES software without the surround back speakers. This function creates the great surround effect from the behind as if you have connected the surround back speakers.

Select “VRTL SB ON” to activate Virtual Surround Back.

VRTL SB ON: While you play Dolby Digital Surround EX software or DTS-ES software, the VIRTUAL SB (Surround Back) indicator lights up.

VRTL SB OFF: Select to deactivate Virtual Surround Back.

Notes:

  • When you have set “NONE” for “SURR SPEAKERS,” this function is not available.

  • While playing back DTS-ES Matrix software with DTS 96/24, DTS 96/24 processing will not be performed with Virtual Surround Back activated. To apply the processing, deactivate Virtual Surround Back.

  • Virtual Surround Back may not be applied to some software.

  • Virtual Surround Back only works for Surround modes (see page

    • 25)

      . This function does not work when activating the DSP mode (see page 27).

20

Setting the Digital Input Terminals

When you use the digital input terminals, register which components you have connected to the digital input terminals.

Digital Input terminal—DIGITAL IN

Set the components connected to the digital terminals.

  • As you rotate MULTI JOG, the digital input terminals are set

to used for the following digital components:

1DVD

2CD

1DVD

2TV

1CD

2DVD

1CD

2TV

1TV

2DVD

1TV

2CD

1CDR

2DVD

1CDR

2CD

1DVD 2CDR

1CD 2CDR

1TV 2CDR

1CDR 2TV

(back to the beginning)

Document info
Document views107
Page views102
Page last viewedSat Dec 03 16:09:06 UTC 2016
Pages40
Paragraphs2251
Words16130

Comments