You can make sound adjustment to your preference after completing basic settings.
Basic Adjustment Items
On the following pages, you can adjust the following items:
You can adjust only the items applicable to the current sound
To do Adjust equalizer pattern at 63 Hz. Adjust equalizer pattern at 250 Hz. Adjust equalizer pattern at 1 kHz. Adjust equalizer pattern at 4 kHz. Adjust equalizer pattern at 16 kHz. Adjust the subwoofer output level.
See page 22 22 22 22 22 22
Adjust the left front speaker output level.
Adjust the right front speaker output level.
Adjust the center speaker output level.
Adjust the left surround speaker output level.
Adjust the right surround speaker output level.
22 22 22
Adjust the effect level. Make the center tone soft or sharp.
Add “wraparound” sound effect with side-wall image.
Items DEQ 63HZ DEQ250HZ DEQ 1KHZ DEQ 4KHZ DEQ16KHZ SUBWFR LEVEL FRONT L LEVEL
FRONT R LEVEL
SURR L LEVEL
SURR R LEVEL
EFFECT*1 CENTER TONE PANORAMA CTRL*2
Before you start, remember... There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
Ex. When adjusting the subwoofer level to “–3.”
1 Press ADJUST. The last selected item appears on the display.
2 Turn MULTI JOG until an item you want appears on the display.
In this example, select “SUBWFR LEVEL.” For available
items, see the list “Basic Adjustment Items.”
*1 Adjustable when one of the DAP modes or Mono Film (see pages 26 and 27) is in use. *2 Adjustable when Pro Logic II Music is in use.
3 Press in MULTI JOG (PUSH SET). The current setting (or level) for the selected item appears on the display.
4 Turn MULTI JOG to select a setting you want or to make an adjustment as you like.
5 Press in MULTI JOG (PUSH SET).
6 Repeat steps 2 to 5 to set other items if necessary.
7 Press EXIT. The source indication resumes on the display.