X hits on this document

136 views

0 shares

0 downloads

0 comments

28 / 40

Using the DSP Modes

This unit activates a variety of DSP modes automatically. The basic settings and adjustments stored (see pages 16 to 22) are applied automatically.

Reproducing the Sound Field

The sound heard in a concert hall, club, etc. consists of direct sound and indirect sound—early reflections and reflections from behind. Direct sounds reach the listener directly without any reflection. On the other hand, indirect sounds are delayed by the distances of the ceiling and walls. These direct sounds and indirect sounds are the most important elements of the acoustic surround effects. DSP modes can create these important elements, and give you a real “being there” feeling.

To use DSP modes, press DSP so that the DSP modes change as follows. The DSP indicator also lights up on the display.

= HALL 1

= HALL 2

= LIVE CLUB

= DANCE CLUB

= PAVILION

= ALL CH STEREO

= THEATER 1

= THEATER 2

= MONO FILM

= (Back to the beginning)

: Suitable for audio sources : Suitable for video sources

Early reflections

Reflections from behind

Digital Acoustic Processor (DAP) modes

You can use the following DAP modes in order to reproduce a more acoustic sound field in your listening room.

Direct sounds

HALL 1:

Reproduces the spatial feeling of a large shoebox- shaped hall designed primarily for classical concerts. (Its seating capacity is about 2000.)

HALL 2:

Reproduces the spatial feeling of a large vineyard- shaped hall designed primarily for classical concerts. (Its seating capacity is about 2000.)

LIVE CLUB:

Reproduces the spatial feeling of a live music club with a low ceiling.

Introducing the DSP Modes

DANCE CLUB: Reproduces the spatial feeling of a rocking dance club.

DSP modes include the following modes—

  • Digital Acoustic Processor (DAP) modes—HALL 1, HALL 2, LIVE CLUB, DANCE CLUB, PAVILION, THEATER 1, THEATER 2

  • ALL CH STEREO

  • MONO FILM—Used for all types of 2-channel signals (including

Dual Mono signal)

PAVILION:

Reproduces the spatial feeling of an exhibition hall with a high ceiling.

THEATER 1*: Reproduces the spatial feeling of a large theater where the seating capacity is about 600.

THEATER 2*: Reproduces the spatial feeling of a small theater where the seating capacity is about 300.

  • *

    The built-in Dolby Pro Logic II decoder is activated when playing

back 2-channel analog or digital source. The indicator lights up.

PRO LOGIC

3D Headphone Mode—3D H PHONE

If you press DSP when the front speakers are deactivated, 3D Headphone Mode is activated without respect to the type of software played back. “3D H PHONE” appears on the display and the DSP and H.PHONE indicators light up.

When using the DAP mode, the sounds come out of all the connected and activated speakers.

  • If surround speakers are set to “NONE” in the speaker setting, JVC’s original 3D-PHONIC processing (which has been developed to create the surround effect through the front speakers only) is used. The 3D-PHONIC indicator lights up on the display.

26

Document info
Document views136
Page views131
Page last viewedFri Dec 09 18:58:43 UTC 2016
Pages40
Paragraphs2251
Words16130

Comments