X hits on this document

121 views

0 shares

0 downloads

0 comments

33 / 40

Operating Other Manufacturers’ Video Equipment

This remote control supplied for the receiver can transmit control signals for other manufacturers’ TVs, CATV converters, VCRs and DVD players.

When operating the other manufacturers’ components, refer also to the manuals supplied with them.

  • After replacing batteries for the remote control, you need to set the

manufactures’ codes again.

Manufacturer

Codes

JVC

01*

Hitachi

10

Magnavox

02

Mitsubishi

03

Panasonic

04, 11

RCA

05

Samsung

12

Sanyo

13

Sharp

06

Sony

07

Toshiba

08

Zenith

09

To change the transmittable signals for operating another manufacturer’s TV

4 Enter a manufacturer’s code using buttons 1 – 9, and 0.

1 2 3

Set the TV/CATV selector to “TV.”

Press and hold STANDBY/ON Press TV SOUND.

TV/CATV.

To change the transmittable signals for operating a CATV converter

1 2 3

Set the TV/CATV selector to “CATV.”

Press and hold STANDBY/ON Press TV SOUND.

TV/CATV.

4 Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

Echostar

01*

General Instrument

02, 03, 04, 05, 06, 07, 08, 09

Hamlin

16, 17, 18, 19

Pioneer

14, 15

RCA

20

Scientific Atlanta

10, 11

Sony

21

Zenith

12, 13

  • *

    “01” is the initial setting.

5

Release STANDBY/ON

TV/CATV.

Now you can perform the following operations on the CATV

converter: STANDBY/ON

TV/CATV: Turn on and off the CATV converter.

TV/CATV CH +/:

Change the channels.

5

  • *

    “01” is the initial setting.

Release STANDBY/ON

TV/CATV.

After pressing TV SOUND, you can perform the following operations on the CATV converter:

Now you can perform the following operations on the TV:

STANDBY/ON

TV/CATV: Turn on and off the TV.

TV/CATV CH +/: Change the channels.

TV VOLUME +/: TV/VIDEO:

Adjust the volume. Set the input mode (either TV or VIDEO).

1 9, 0, 100+ (+10): Select the channels. The 10 (ENTER) button will function as the ENTER button if your CATV converter requires pressing ENTER after selecting a channel number.

After pressing TV SOUND, you can perform the following operations on the TV:

1 9, 0, 100+ (+10): Select the channels. The 10 (ENTER) button will function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.

6 Try to operate your CATV converter by pressing

STANDBY/ON TV/CATV. When your CATV converter on or off, you have entered the correct code.

If there are more than one code listed for your brand of CATV converter, try each one until the correct one is entered.

Notes:

  • All the functions listed above may not be assigned to the buttons for some TVs.

  • If you cannot change the channels of some TVs by pressing the number buttons, press TV/CATV CH +/– for changing the channels.

6 Try to operate your TV by pressing

STANDBY/ON TV/CATV. When your TV turns on or off, you have entered the correct code.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

If there are more than one code listed for your brand of TV, try each one until the correct one is entered.

Continued on the next page

31

Document info
Document views121
Page views116
Page last viewedTue Dec 06 08:36:33 UTC 2016
Pages40
Paragraphs2251
Words16130

Comments