X hits on this document

134 views

0 shares

0 downloads

0 comments

34 / 40

Operating Other Manufacturers’ Video Equipment

To change the transmittable signals for operating another manufacturer’s VCR

To change the transmittable signals for operating another manufacturer’s DVD player

1

Press and hold STANDBY/ON

2

Press VCR.

VCR.

1 Press and hold STANDBY/ON 2 Press DVD.

DVD.

3 Enter a manufacturer’s code using buttons 1 – 9, and 0.

3 Enter a manufacturer’s code using buttons 1 – 9, and 0.

Manufacturer

Codes

JVC

01*, 02, 03

Emerson

10, 22

Gold Star

11

Hitachi

04

Mitsubishi

12

NEC

21

Panasonic

07, 13

Philips

09

RCA

05, 06

Samsung

20

Sanyo

17, 18, 19

Sony

14, 15, 16

Zenith

08

4

Manufacturer

Codes

JVC

01*

Panasonic

02

Philips

04

Pioneer

03

Sony

05

Toshiba

06

Yamaha

07

  • *

    “01” is the initial setting.

Release STANDBY/ON

DVD.

Now you can perform the following operations on the DVD

player: STANDBY/ON

DVD:

Turn on and off the DVD player.

4

  • *

    “01” is the initial setting.

Release STANDBY/ON

VCR.

After pressing DVD, you can perform the following operations on the DVD player:

Now you can perform the following operations on the VCR:

STANDBY/ON

VCR: Turn on and off the VCR.

VCR CH +/:

Change the TV channels on the VCR.

After pressing VCR, you can perform the following operations on the VCR:

3: 4:

¢:

7: 8:

Start playing. Return to the beginning of the current (or previous) chapter (or fast reverse for some models). Skip to the beginning of the next chapter (or fast forward for some models). Stop playing. Pause playing. To resume, press 3.

3: REW: FF: 7: 8: REC PAUSE:

Start playing. Rewind the tape. Fast-forward the tape. Stop playing or recording. Pause playing. To resume, press 3. Enter recording pause. To start recording, press this button then 3.

5 Try to operate your VCR by pressing

After pressing DVD, these buttons can be used for the DVD menu operations.

Note:

For detailed menu operations, refer to the instructions supplied with the discs or the DVD player.

4

MENU

7/P

ENTER

10

2

8

6

STANDBY/ON VCR. When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of VCR, try each one until the correct one is entered.

5 Try to operate your DVD player by pressing

STANDBY/ON DVD. When your DVD player turns on or off, you have entered the correct code.

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

32

Document info
Document views134
Page views129
Page last viewedFri Dec 09 13:56:15 UTC 2016
Pages40
Paragraphs2251
Words16130

Comments