Programming Channel Data – Configuration Commands
Configuration Command List
The Configuration Commands are Level 3 and Level 4 as follows:
L3-1 Set Boot Memory for MAIN (Last Selected, Last Programmed).
L3-3 Set HEX / Decimal Edit for TalkGroup & NAC.
L3-4 Show current firmware version.
L3-5 Set Scan Parameters (revert mode, reply timer, monitor timer, delay timer).
L3-6 Set PTT Max Timer (30, 60, 90 seconds).
L3-7 Set Sidetone Audio
L3-8 Communicate with PC (for PC programming).