X hits on this document

127 views

0 shares

0 downloads

0 comments

20 / 32

5-2.

Changing Drive Rolls

It may be necessary to remove drive roll side of gun case to change lower drive roll.

Tools Needed:

OM-230 261 Page 16

9

8

7

6

4

3

5

2

1

Turn off and disconnect input power.

1

Drive Roll Cover

Remove cover.

Changing Push Roll:

To remove push roll:

2

Push Roll Screw

3

Washer

4

Push Roll

Remove screw and washer, and lift out drive roll.

To install drive roll:

Slide drive roll onto shaft and se- cure with washer and screw.

Changing Lower Drive Roll: To remove drive roll:

5

Lower Drive Roll Screw

6

Washer

7

Lower Drive Roll

8

Drive Roll Key

9

Drive Roll Shaft

Remove screw and washer, and lift out drive roll. Note: drive roll key will come out with drive roll.

To install drive roll:

Place drive roll key in slot in drive roll shaft.

Line slot in drive roll up with drive roll key, and slide drive roll onto shaft.

Secure drive roll with washer and screw.

Reinstall gun case, if applicable. Reinstall drive roll cover.

804 698-A

Document info
Document views127
Page views127
Page last viewedTue Jan 24 12:04:00 UTC 2017
Pages32
Paragraphs1293
Words16174

Comments