X hits on this document

98 views

0 shares

0 downloads

0 comments

18 / 32

Magnin Memorex Mitsubishi Orion Panasonic Penney Quasar RCA

0240 0037,0162 (for TV use 0250) 0048 (for TV use 0093) 0002, 0294, 0479 0035 (for TV use 0051),0162 (for TV use 0250) 0035 (for TV use 0051),0240,0162 (for TV use 0250) 0035 (for TV use 0051),0162 (for TV use 0250)

0060 (for TV use 0047),0035 (for TV use 0051), 0048 (for TV use 0093)

Sansui Sanyo Sears Sharp Sony Symphonic Zenith

0000, 0479 0240 0000, 0037 0048 (for TV use 0093) 0032 (for TV use 0000) 0000 0000

PROGRAMMING TV/VCR COMBO CONTROL Setup Codes for TV/VCR Combos (continued):

PROGRAMMING CABLE CONVERTER (OR DBS RECEIVER) CONTROL

The Millennium 4 is preprogrammed at the factory to operate the cable converter given to you by your cable company. However,if you have another brand or model of cable converter or satellite receiver that you would like to control,then you’ll need to perform the following instructions to unlock the cable key,enter in a new code, and lock the cable key again.

To Unlock the CBL Key:

  • 1.

    Turn on the Cable Converter or DBS Receiver.

  • 2.

    On the Millennium 4,press CBL once.Press and hold SETUP until the LED blinks twice, then release SETUP.

  • 3.

    Enter 9 - 9 - 7.The LED will blink twice.

  • 4.

    Press CH- once.The LED will blink twice.

18

Document info
Document views98
Page views98
Page last viewedFri Dec 09 15:41:43 UTC 2016
Pages32
Paragraphs1065
Words6058

Comments