X hits on this document

92 views

0 shares

0 downloads

0 comments

24 / 32

Victor

0074

Wards

0014, 0054

Yamaha

0176, 1176, 0186

Yorx

0195

Zenith

0857

PROGRAMMING AUDIO CONTROL Setup Codes for Audio Amplifiers (continued):

SEARCHING FOR YOUR CODE

If your TV,VCR or DVD Player,Cable Converter,or Audio Component does not respond to the Millennium 4 after trying all of the codes listed for your brand,or if your brand is not listed at all,try searching for your code.

For example,to search for a code for your TV:

  • 1.

    Turn on your TV.

  • 2.

    On the Millennium 4,press and hold SETUP until the LED blinks twice,then release SETUP.

  • 3.

    Enter 9 - 9 - 1.The LED will blink twice.

  • 4.

    Aim the remote control at the the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off. NOTE: In the search mode, the Millennium 4 will send IR codes from its library to the selected compo- nent, starting with the most popular code first.

  • 5.

    Press SETUP once to lock in the code.

  • 6.

    To search for the codes of your other components,repeat steps 1 through 5,but substitute the appropriate key (i.e.,VCR,CBL, or AUDIO) for the (VCR or DVD,Cable,or Audio) component you are searching for.

24

Document info
Document views92
Page views92
Page last viewedWed Dec 07 22:55:56 UTC 2016
Pages32
Paragraphs1065
Words6058

Comments