X hits on this document

89 views

0 shares

0 downloads

0 comments

27 / 32

CHANGING VOLUME LOCK

The Millennium 4 is set to control volume of a component through your TV while in the TV,VCR,or Cable mode. However,in the Audio mode,you have separate control of of your audio component’s volume.

If your TV is not remote controllable,or if you would like the volume to be controlled by a different component,you can change the Volume Lock setting to control a volume through a non-associated mode (e.g.,through the cable in the TV mode).

To Change Volume Lock to the Cable Mode:

  • 1.

    On the Millennium 4,press and hold SETUP until the LED blinks twice,then release SETUP.

  • 2.

    Enter 9 - 9 - 3 and then press CBL once.The LED will blink twice.

3.

Now,whenever you press VOL+,VOL-,or MUTE on the Millennium 4,volume will be controlled by your cable converter or DBS receiver.

To Change Volume Lock to the TV Mode:

  • 1.

    On the Millennium 4,press and hold SETUP until the LED blinks twice,then release SETUP.

  • 2.

    Enter 9 - 9 - 3 and then press TV once.The LED will blink twice.

3.

Now,whenever you press VOL+,VOL-,or MUTE on the Millennium 4,volume will be controlled by your TV.

To Change Volume Lock to the VCR Mode:

  • 1.

    On the Millennium 4,press and hold SETUP until the LED blinks twice,then release SETUP.

  • 2.

    Enter 9 - 9 - 3 and then press VCR once.The LED will blink twice.

3.

Now,whenever you press press VOL+,VOL-,or MUTE on the Millennium 4,volume will be controlled by your VCR or DVD player.

continued on next page...

27

Document info
Document views89
Page views89
Page last viewedTue Dec 06 18:10:49 UTC 2016
Pages32
Paragraphs1065
Words6058

Comments