PROGRAMMING TV CONTROL
NOTE: f you own a TV/VCR combination, skip this section and perform“Programming TV/VCR Combo Control”on page 16.
Locate the brand name of your TV in the Setup Codes for TVs in the next section,and write it in the space below.
TV Brand: __________________________________
The brands are listed in alphabetical order with the most popular codes listed first.You will use one of these codes to program the Millennium 4 to operate your TV:
Turn on the TV.
On the Millennium 4,press TV once.Press and hold SETUP until the LED blinks twice,then release SETUP.
Enter the first four-digit code for your TV. If you perform this procedure correctly,the LED will blink twice. NOTE: f the LED did not blink twice after entering the code’s last digit, then repeat steps 2 through 3 and try entering the same code again.
Aim the Millennium 4 at your TV and press POWER once.The TV should turn off.If it does not,repeat steps 2 and 3,trying each code for your brand until you find one that works.If it still does not work,try searching for the code (see Searching For our Code on page 24).
For future reference,write your TV code in the boxes below.
NOTE: Remembe , to use the Millennium 4 to operate your T , press TV first.
Setup Codes for TVs:
0451, 0180, 0623, 0092