MODEL NUMBERS OF SEALED LEAD-ACID BATTERIES
Composition of Model Numbers.
9 10 11 12
Model No. L C -
: Corresponding model number descriptions are listed below.
Please refer to the battery indexes for listings of available models.
No. 1 to 3: Product division codes (all of which are assigned by Panasonic). “LC” means Panasonic Sealed Lead-Acid batteries. No. 4: Fixed single-figure code (alphabetic letter) indicating properties, shape, etc. of the battery
R : Small-sized common products L : Medium-sized common products S : OEM products of special sizes T : Same type products as "S" but for trickle use V : Products of "T", "R" and "L" types with flame-
retardant battery case (option) P : Products combining trickle long life and flame-
retardant battery case X : Trickle long life products XC : Cycle long life products
No. 5: Single code (alphabetic letter) for dividing products of the same type and the same capacity but having different shapes. (This figure may be omitted when not applicable, then the proceeding codes are advanced.)
No. 5 to 7: Double-figure fixed codes indicating nominal voltage by numerical value.
Examples: 2V = 02, 6V = 06, 12V = 12, 24V = 24, etc.
No. 7 to 10: One- through four-figure (maximum) codes indicating capacity by numbers: decimal point is expressed by R (When some codes are not applicable, the proceeding codes are advanced.)
Examples: Capacity (20 hour rate)
4Ah 7.2Ah l2Ah 3000Ah
No. 8 to 12: One- through five-figure (maximum) alphanumeric code for classifying products by terminal type, package form, destination code, etc.
P: English label J: Japanese label G: VdS certified products
(Note 1) Division codes are subject to change.
Sealed Lead-Acid Handbook, Page 28