XAD Unified Access Control DVR
The Unified Access Digital Video Recorder (UADVR) shall include four (4 or 8) 5VDC TTL to 12 VDC compatible general purpose outputs on removable 3.5mm terminal block plugs, to interface with devices such as: lights, warning sirens, locks as well as 12 VDC alarm and access control panels. Each control output shall be able to internally drive a 0 to 3 VDC TTL logic signal and sink 12 VDC loads with an external 12 VDC power source. Each output shall be rated at 30 mA maximum current source at 3 VDC, and 100 mA maximum current sink from 3 VDC to 12 VDC.
Besides network connections all physical connections shall be made directly to the unified DVR, without the need for additional hardware.
The Unified Access Digital Video Recorder (UADVR) shall include e-mail on alarm and a simplified icon based user interface. The Unified Access Digital Video Recorder shall incorporate a 10/100/1000 Mbps network port.
The Unified Access Digital Video Recorder (UADVR) shall have the ability to be configured as a SNTP client (Simple Network Time Protocol), allowing the DVR to automatically synchronize to an SNTP server.
Each Individual camera configuration shall be available within the local user interface on a video settings panel that consolidates all video settings. Automatic changeover of camera type from color to monochrome in low light conditions shall be available when using color/monochrome cameras. The configuration shall include:
Color or B&W camera
Brightness, Contrast, Hue, Saturation
Rate of motion
Motion detection test
PTZ camera address
PTZ port attributes