Thin Web Server
Setup Program – Serial Connection
Minimum PC Requirements for Setup and Browser Programs
The Thin Web Server requires the following minimum system configuration for the setup and browser program for serial connection:
Microsoft® Windows® 2000 or XP operating system
Personal computer with Pentium™ 4 2 GHz or higher processor
Serial Port (RS-232), Ethernet Port (RJ-45)
How to Install the Setup Program for Serial Connection The Thin Web Server Setup program on the CD-ROM must be installed on the PC or notebook PC that is temporarily connected to the Thin Web Server. The setup.exe program takes you through the installation with on- screen instructions.
Note: Windows may require Administration rights to install this software.
Load the CD into the PC’s CD-ROM drive.
The PC should automatically launch the setup.exe file (if the PC is set-up for autorun). If the installation does not start automatically, click Start on the taskbar, then choose Run from the Start menu.
In the dialog box type the filename setup.exe. Use (your CD drive letter):\setup.exe (e:\setup.exe for example). Click OK.
The Thinweb Server Setup Program logo displays during installation process.
The Welcome screen displays after the CD is read.
To proceed click Next to continue or click Cancel to quit.
Continued on next page Î.