X hits on this document





19 / 43


Setup Program – Serial Connection

Alarms - Email Address

Alarms - ATS Power Manager Setting

Alarms - Engine PM Details

Thin Web Server

6. Click the Email Address lower tab. Then enter the e-mail addresses (up to 5) of the persons whom you want notified of the selected alarms. Double check each e-mail address displayed in the five text boxes to verify that it has been typed correctly. Note: Make sure outgoing mailserver is configured properly and working. This functionality can be tested with third party e-mail testing programs.

  • 7.

    Click the ATS Power Manager Setting lower tab. The Network 1 Power Managers (addresses) are displayed first. For each Power Manager (PM) address click the drop-down arrow and select the appropriate icon number associated with the PM. If a Power Manager:

    • -

      is with an ATS, select icon 1.

    • -

      is with a circuit breaker, select icon 3 or 4.

    • -

      is not associated with an ATS or a CB, select icon 2.

Then click View Network 2 Settings and select icons for those PMs.

  • 8.

    Click the Engine PM Details lower tab. Network 1 & 2 Engine Power Manager (addresses 33-36) are displayed. Enter a Description and Location for each PM. Then select the appropriate icon associated with each PM. Select if device is associated with CCM, EGCP, or both.

  • 9.

    Click the Engine Power Manager Setting lower tab. Select the check boxes Status Inputs and/or Discrete Outputs that you want included in alarms monitoring.

continued on the next page Ö

Alarms - Engine Power Manager Setting

Document info
Document views79
Page views79
Page last viewedSat Oct 22 07:19:47 UTC 2016