X hits on this document

132 views

0 shares

0 downloads

0 comments

31 / 43

8-2

Client Settings

5. Install Internet Protocol by clicking on Install button. If already installed highlight Internet Protocol (TCP/IP) and click on Properties.

  • 6.

    If your PC is on the company network contact your IT personnel for appropriate settings. If you are connecting to an ISP using DSL or cable modem contact your service provider for the settings.

  • 7.

    If you have created a dedicated local area network to connect to the Thin Web Server this is where you have to enter a unique IP number for your PC. For example if

Thin Web server IP configuration is: IP no. : 169.254.001.002 Subnet: 255.255.255.0 Gateway: 0.0.0.0

Computer IP configuration will be: IP no. : 169.254.001.003 Subnet: 255.255.255.0 Gateway: 0.0.0.0

Note: Once the TCP/IP setup is complete at the PC it is preferred to re-boot the PC.

8. To verify if the Ethernet connection between the PC and the Thin Web Server is working click on the following:

Thin Web Server

Start > Programs > Accessories > Command Prompt

On the command prompt type: C:\ >ping 169.254.001.002

(If IP address of the Thin Web server is as listed in the example otherwise replace it with the new assigned one).

9. To see the PC’s IP settings type: C:\>ipconfig

Note: The network administration determines the IP Address numbers and Subnet Mask numbers.

Document info
Document views132
Page views132
Page last viewedTue Dec 06 20:37:57 UTC 2016
Pages43
Paragraphs989
Words8405

Comments