X hits on this document

1032 views

0 shares

0 downloads

0 comments

147 / 236

Displaying CPU Activity (RCPU)

Displaying CPU Activity (RCPU)

CPU Activity panel

The CPU Activity panel (Figure 48 ) shows the percentage of time each region used the CPU for the 15 minute interval specified as the EPILOG collection interval.

Note the new Transport Manager Subsystem (TMS) region type, used if you have Remote Site Recovery (RSR).

This is an RCPU panel for an IMS using a TMS address space.

FIGURE 48. RCPU Panel

+============================== CPU Activity =================================+

| PERIOD:

11:45 TO 12:00 ON 01/02/97

ELAP = 15:00 M

IMSD |

+-----------------------------------------------------------------------------+

TCB --- 17.2 % 3.8 % 11.7 %

SRB --- 4.4 %

.9 % 2.0 %

4.5 % .4 %

1.1 % .0 %

| Region | ------ | CONTROL | MESSAGE1 MPP | MESSAGE2 MPP | MESSAGE3 MPP | IMS510TM TMS Type ---- CTL

Total ----- 21.6 % 4.7 % 13.7 % 5.6 % | .4 % | | | | | Region | ------ MESSAGE4 FPMSG1 FPMSG3

Type ----

MPP FP FP

5.2 %

1.2 %

9.7 %

3.2 %

1.0 %

.3 %

TCB

SRB

Total |

---

---

6.4 % | 2.9 % | ----- |

1.3 % | | |

+=============================================================================+

The fields in the RCPU panel are described below.

Region Type TCB

Region name Type of region selected Percentage of time during the interval that the CPU time was

used by the region job step TCB

SRB

Percentage of time during the interval that the CPU time was used by the region job step SRB

Total

TCB + SRB

Sample Resources Panels

147

Document info
Document views1032
Page views1032
Page last viewedSun Dec 11 08:13:27 UTC 2016
Pages236
Paragraphs8116
Words69808

Comments